Information shown on the Trip computer screen
• The course indicator at the top of the screen shows the direction where you are
heading. The course is indicated by red arrows in the centre of the field. N
stands for north, S for south, E for east, and W for west.
If the current course cannot be shown, the course indicator briefly shows the
last known course and then disappears from the screen.
• The
Speed
field shows the current speed. If the speed is very low, it is indicated
by <1.
The speed is not shown if the GPS receiver cannot determine it.
• The
Altitude
field shows the approximate altitude of your current location. If
the location is below sea level, a negative value is shown.
The altitude is not shown if the GPS receiver cannot determine it.
• The
Average speed
or
Avg. speed
field shows your average speed. If you stop,
the GPS receiver continues to calculate this speed. The longer you stay still, the
lower the average speed will be.
If the current average speed cannot be shown, the last saved average speed is
shown instead.
• The
Maximum speed
or
Max. speed
field shows your maximum speed after the
last reset of the speed counter.
If the current maximum speed cannot be shown, the last saved maximum
speed is shown instead.
Copyright
©
2004 Nokia. All rights reserved.
16
• The
Timer
field shows the time that has elapsed since the last reset of the
timer. The timer continues to run even if the GPS receiver cannot receive
signals from the GPS satellites.
The timer is reset if you exit the GPS application.
• The
Odometre
field shows the distance that you have covered since the last
reset of the odometre.
If the current distance cannot be shown, the last saved distance is shown
instead.
• The
Maximum altitude
or
Max. altitude
field shows the altitude of your highest
location since the last reset of the altitude meter.
If the current maximum altitude cannot be shown, the last saved maximum
altitude is shown instead.
• The
Minimum altitude
or
Min. altitude
field shows the altitude of your lowest
location since the last reset of the altitude meter.
If the current minimum altitude cannot be shown, the last saved minimum
altitude is shown instead.