Xpress on GPS Shell - Following a route

background image

Following a route

On the

Route guidance

screen, you can follow the route that you have activated

on the

Routes

screen or navigate to the waypoint that you have activated using

the

Go to

option of the

Mark position

function (available on several screens).

The screen shows the following information: course, bearing, next waypoint,
speed, and distance to the next waypoint.

• The blue course arrow indicates the direction where you are heading. The

direction is indicated by N (north), S (south), E (east), and W (west).

The yellow bearing arrow indicates the direction where you should be heading
to reach the next waypoint.

To reach the next waypoint, adjust your direction so that the two arrows point
to the same direction.

If the GPS receiver cannot receive the needed positioning information from
GPS satellites, the

Next:

and

Dist. to next

fields are empty, and a question mark

is shown in the middle of the screen.

background image

Copyright

©

2004 Nokia. All rights reserved.

18

Tip: You can also use the

Route guidance

screen as a compass if you

have not activated a route but the GPS receiver is receiving the
needed positioning information from GPS satellites. In this case, the
screen shows the current course and speed when you are on the
move.

• The

Next

field shows the next waypoint. The phone shows a note when you are

approaching or reaching the waypoint.

• The

Speed

field shows the current speed.

• The

Dist. to next

field shows the distance to the next waypoint.

If you press any selection key on the

Route guidance

screen, you can select

Deactivate route

if you do not want the

Route guidance

screen to show the

bearing arrow and the next waypoint, or you can select

Mark position

to save your

current location as a waypoint (see

Saving a waypoint (Mark position)

on page

14

).